|
Explanation on possible options:
|
||
|
Touch-Panel |
4-wire non-glare (Standard) |
Choose a 4-wire touch-screen for the most common/plain applications. The 5-wire is used in an industrial or heavy duty environmental. |
|
|
4-wire glare |
The benefits of a 5-wire touchscreen compared to a 4-wire is the extended life-time (about 5x longer) and the touchscreen will still function after the top foil is damaged. |
|
|
5-wire non-glare |
The non-glare touchscreen (standard) is less brilliant than the glare version, an advantage of the non-glare version is that there are no reflections. |
|
|
5-wire glare |
|
|
Controller |
USB (standard) |
The most common application when the the monitor is placed nearby the computer |
|
|
RS232 with PS2 |
If it is necessary to use a com port. (You also need a PS2 port to provide the controller of power). |
|
|
RS232 internal powered |
For a longer distance (up to 25 meter) between computer and monitor. |
|
Software |
Touchkit |
Standard driver (comes with the monitor on a CD-rom) |
|
|
ELO |
When
you already use an ELO driver (when you replace an ELO touchscreen
monitor) or when you use soft/hardware witch are only supported by ELO
drivers. |
|
Protection |
Standard |
The protection is as declared by the manufacturer |
|
|
Waterproof front (IP 65) |
If there is a chance that the monitor can come in contact with water. For example a point of sale in a restaurant. |
|
|
Dustfilter (on the backside of the monitor) |
This application is used in dusty environmental (the backside of the monitor needs to be vacuum cleaned frequently). |
|
Mounting |
plain |
|
|
|
brackets |
The monitor with extra brackets is mounted to the backside of a panel. The cut out square according to the monitor size has to be done very precisely. |
|
|
Panel: black powdered coating or stainless steel |
The monitor is mounted to a bezel. The bezel can be fixed to a board (max. thickness 20 mm) The cut out for the opening can be rough. The bezel will come in brushed stainless steel or in a black powder coating. |
|
|
VESA wallmounting |
The Monitor is mounted to a wall with a special hitch-in bracket. There will be an airgap between monitor and wall of ca. 37mm. |
|
|
VESA wallmounting with extended cover |
The same as above but there is an extended cover of the monitor, the airgap is about 2mm. |
|
|
Add-on-wall Domo-O |
Arranged for domotica. The extended backside of the monitor is placed in a metal case witch is bricked into a wall. The front of the monitor is ca. 30 mm in front of the wall. |
|
|
Add-in-wall with panel Domo-S |
Arranged for domotica. The monitor with RVS or black powdered bezel is hooked in in 55mm a deep bricked in metal case. Only the panel (3mm) sticks out outside the wall. |
|
|
Add-in-wall with panel Domo-L |
The same as above, the metal case is 95 mm deep. It is possible to add a Mini-ITX-board. |
|
|
19-inch-rack |
Plain black powdered bracket for the assembly in a 19-inch-rack For example in a 19-inch audio or light system. |